Carrello
0 Prodotto: Prodotti: (vuoto)
Nessun prodotto
Da determinare Spedizione
0,00 € Totale
I prezzi sono IVA esclusa
Prodotto aggiunto al tuo carrello
Quantità
Totale
Ci sono 0 articoli nel tuo carrello. Il tuo carrello contiene un oggetto.
Totale prodotti (Tasse escluse)
Totale spedizione (Tasse escluse) Da determinare
Totale (Tasse escluse)
Gigabit passive POE iniector 5 ports, 7A, without management
Gigabit PoE injector is manufactured in our company to the needs of operators, wireless internet. As the only passive PoE device can deliver up to 1.5A power supply cable Ethernet standard 1 Gb/s. This effect was achieved using special, high current transformers on signal lines ethernet manufactured in Poland for our order. Power signal is introduced only four lines in accordance with the passive PoE 100 Mb/s, so that the device is completely compatible with the slower version of the LAN. PoE injector meet the power requirements of 12V to 56V. A practical solution is also the case of height and depth, and an optional 1U mounting bracket on the DIN-rail.
- high current carrying capacity *
- full bandwidth of 1 Gb/s
- over-voltage protection on the input
- overcurrent protection on the PoE outputs
- assembly rack or DIN-rail
*Ethernet RJ45 connector is not intended for long-term load current of 1A above! We recommend using the highest quality RJ45 plugs - necessarily with gold plated pins.
the amount of 1Gbit ports | 5x LAN, 5x LAN + PoE |
PoE standard | 4+, 5+, 7–, 8– |
supply voltage (terminal peg) | 12 ÷ 56 V DC |
power consumption on a single PoE port | maximum 1,5 A (recommended to 1 A) |
total current consumption on all ports | ≤ 7 A |
reverse polarity protection | YES |
output short-circuit protection | YES 1,6 A |
operating temperature range | –20 do + 65 °C |
dimensions (height x width x length) | 45 x 78 x 170 mm (207 mm with holders) |
casing | Type 1U with the option of mounting on DIN-rail |
weight | 530 g |